Toothpaste Dispenser with Toothbrush Holder + 5 Royal Toothbrushes
Toothpaste Dispenser Touch Me
This is a unique Automatic Toothpaste Dispenser for your convenience, Hygienic and Economy in using toothpaste in the bathroom. Its design is very simple and use easily through convenient one-touch method. It prevents waste of toothpaste. Be compatible with any kind of toothpaste. Don't need to use screw to install it. 3M double-sided adhesive tape. The automatic toothpaste dispenser needn't any electrical power. For your hygiene in your bathroom, it is an essential product. The most important part is made from food-grade silicone. Easy to take apart and wash.
Common Questions about the Toothpaste Dispenser
1. Can control the amount of the toothpaste?
We usually squeeze the toothpast too much or too little, and sometimes carelessly drops it onto the ground ,using him control the amount easily every time, and according to the depth of toothbrush into the toothpaste to control the output
2. Can the toothpaste squeeze all ?
Be able to use out the toothpast and no waste,after using out the toothpaste,there is almost no residues in tubes. First installation needs toothpaste heavy inserting into the toothpaste dispenser.
3. The now toothpaste mouth sizes different from one to another , all right?
Of course, because the interface mouth is elastic contact material, after the toothpaste is inserted,it's mouth wil be surrounded tightly, hence achieve no leak of the vacuum effect, make the toothpaste appeared on the toothbrush without any leak
4. How does the touch me stick on? Will fall?
This product is of the powerful anti-water strong adhesive, and very firm .
Step: choose well metope location using dry cloth wipe it , unravel the glue back scarfskin , hard pressing by a few times, success.
5. Does this product need for electricity?
Need not, completely vacuum pneumatic squeezing.
6. Does this product attach toothbrush holder ?
Yes,two colors which is white and purple, Kids self squeeze toothpaste: In the begining kids isn't able to do it,always be helped by mom and dad. using it,it becomes very easy.
Double-sided adhesive tape instructions:
1. Surface treatment
Requirements: adhesive surfaces must be clean, dry, smooth, cannot have the pollution. Use a clean cloth or paper to clean adhesive surfaces ( ceramic tile, the mirror ),and use blower to blown the surface dry.
To achieve good results,put some pressure to the adhesive tape and adhesive surface, make a good contact between the adhesive tape and adhesive surface not apply to serious uneven surface.
Double-sided tape is adhesive the first, but the maximum intensity requires 72 hours, during this period,please don't make structural operating , within 24 hours use products ,it needs hands pressure
After the gluing use blower to increase adhesive tape and adhesive object temperature, about 50 - 70 degree. About 10 minutes heating, meanwhile increase stress.
Note: the above four essential, surface treatment is the key.
Original product box dimention (cm): 21.5 x 12.8 x 6.9
Product size: 15.5 x 5.9 x 4